In this guide, you will learn How To safely Flash / Install a Stock Firmware Using Odin Flashing Tool.This guide will work on all Samsung Android devices.It is a very simple and easy process.So just follow the step by step guide to Flash Stock Samsung ROMs using Odin.

You need to have the right Firmware for your device otherwise, you will brick your phone.You can use this method to flash the OTA updates (img.) files manually.This is the most secure method to manually update your device to the latest official release.Now we are going to tell you the step by step guide for it.

WARNING:

Hacktronicz.com will not be held responsible for any kind of damage occurred to your Samsung Android device while following this tutorial.Do it at your own risk.

REQUIREMENTS:

Make sure your device has more than 50% of juice
Make Sure Samsung USB drivers are installed on your PC.

How To Install A Stock Firmware Using

1. First Download the right Firmware according to your device’s model number.If it is .Zip file then extract it, you will get .taror .tar.md5.

2. Download and Unzip the Odin 3.12.3 .zip (or Latest Odin) file and run/open the exefile from the extracted files on your PC.

3. Now Boot your Samsung deviceinto Download Mode.(First power off your device and then press, Volume Down + Power + Home. Press Volume Up now to continue to Download Mode)

4. Then simply connect the phone to your PC via the use of USB cable and the ODIN would notify an added message.

5. After that, choose AP in Odin and select the firmware file in which you have downloaded. (Will be in .tar.md5format)

6. Now Click the “Start” button at the bottom of the ODIN screen to start the process. Now the flashing process will start on your phone and this will take some time.

7. Once completed, your phone will reboot.

8. Now your device should have the Stock Firmware running.